Nortel Networks 2300 Series manual Show aaa Output, User Nin

AAA Commands 221

sg3: rs-5

Web Portal: enabled

set authentication admin Jose sg3 set authentication console * none

set authentication mac ssid mycorp * local

set authentication dot1x ssid mycorp Geetha eap-tls

set authentication dot1x ssid mycorp * peap-mschapv2 sg1 sg2 sg3 set authentication dot1x ssid any ** peap-mschapv2 sg1 sg2 sg3 set accounting dot1x Nin ssid mycorp stop-only sg2

set accounting admin Natasha start-stop local

user Nin

Password = 082c6c64060b (encrypted)

Filter-Id = acl-999.in

Filter-Id = acl-999.out

mac-user 01:02:03:04:05:06 usergroup eastcoasters

session-timeout = 99

Table 30 describes the fields that can appear in show aaa output.

	Table 2: show aaa Output
Field	Description
Default Values	RADIUS default values for all parameters.
authport	UDP port on the WSS for transmission of RADIUS authorization and
	authentication messages. The default port is 1812.
acctport	UDP port on the WSS for transmission of RADIUS accounting records. The
	default is port 1813.
timeout	Number of seconds the WSS waits for a RADIUS server to respond before
	retransmitting. The default is 5 seconds.
acct-timeout	Number of seconds the WSS waits for a RADIUS server to respond to an
	accounting request before retransmitting. The default is 5 seconds.
retrans	Number of times the WSS retransmits a message before determining a
	RADIUS server unresponsive. The default is 3 times.
deadtime	Number of minutes the WSS waits after determining a RADIUS server is
	unresponsive before trying to reconnect with this server. During the dead time,
	the RADIUS server is ignored by the WSS. The default is 0 minutes.
key	Shared secret key, or password, used to authenticate to a RADIUS server. The
	default is no key (null).

Nortel WLAN—Security Switch 2300 Series Command Line Reference