Nortel Networks 2300 Series Init-The AP has been recognized by the WSS, Image from the WSS

372AP Commands

	Table 13: Output for show ap status (continued)
Field	Description
State	State of the AP:
	• init—The AP has been recognized by the WSS
	but has not yet begun booting.
	• booting—The AP has asked the WSS for a boot
	image.
	• image downloading—The AP is receiving a boot
	image from the WSS.
	• image downloaded—The AP has received a boot
	image from the WSS and is booting.
	• configuring—The AP has booted and is ready to
	receive or is already receiving configuration
	parameters from the WSS.
	• operational—The AP has received configuration
	parameters for one or more radios and is ready to
	accept client connections.
	• configure failure—One or more of the radio
	parameters received from the WSS is invalid.
	For APs, this field also indicates whether the AP’s management
	traffic with the WSS is encrypted, and whether the AP’s
	fingerprint has been verified on the WSS:
	• not encrypted—The management session is not
	encrypted.
	• encrypted but fingerprint not verified—The AP’s
	management traffic is encrypted, but the AP’s
	fingerprint has not been verified in WSS
	Software.
	• encrypted and verified—The AP’s management
	traffic is encrypted and the AP’s fingerprint has
	been verified in WSS Software.
CPU info	Specifications and identification of the CPU.
	For AP models other than AP-1xxor AP-2xx, the ID portion of
	this field is not applicable.
Uptime	Amount of time since the AP booted using this link.

NN47250-100 (Version 02.51)