Nortel Networks 2300 Series manual Reset port, See Also show port counters on, WSS# reset port

42Port Commands

Table 3: Output for monitor port counters (continued)

Statistics Option	Field	Description
transmit-etherstats	Tx 64	Number of packets transmitted that were 64 bytes
		long.
	Tx 127	Number of packets transmitted that were from 65
		through 127 bytes long.
	Tx 255	Number of packets transmitted that were from 128
		through 255 bytes long.
	Tx 511	Number of packets transmitted that were from 256
		through 511 bytes long.
	Tx 1023	Number of packets transmitted that were from 512
		through 1023 bytes long.
	Tx 1518	Number of packets transmitted that were from 1024
		through 1518 bytes long.

See Also show port counters on page 46

reset port

Resets a port by toggling its link state and Power over Ethernet (PoE) state.

Syntax reset port port-list

port-list List of physical ports. WSS Software resets all the specified ports.

Defaults None.

Access Enabled.

Usage The reset command disables the port’s link and PoE (if applicable) for at least 1 second, then reenables them. This behavior is useful for forcing an AP that is connected to two WSSs to reboot over the link to the other switch.

Examples The following command resets port 5:

WSS# reset port 5

NN47250-100 (Version 02.51)