Nortel Networks 2300 Series manual Clear dot1x bonded-period, Clear dot1x max-req

506802.1X Management Commands

set dot1x timeout supplicant on page 505 clear dot1x timeout supplicant on page 499

Settings, Active Clients, and show dot1x on page 507

Statistics

clear dot1x bonded-period

Resets the Bonded Auth period to its default value.

Syntax clear dot1x max-req

Defaults The default bonded authentication period is 0 seconds.

Access Enabled.

History Introduced in WSS Software Version 2.1.

Usage

Examples To reset the Bonded period to its default, type the following command:

WSS# clear dot1x bonded-period

success: change accepted.

See Also

•set dot1x bonded-period on page 500

•show dot1x on page 507

clear dot1x max-req

Resets to the default setting the number of Extensible Authentication Protocol (EAP) requests that the WSS retransmits to a supplicant (client).

Syntax clear dot1x max-req

Defaults The default number is 20. Access Enabled.

History Introduced in WSS Software 1.0.

Examples To reset the number of 802.1X requests the WSS can send to the default setting, type the following command:

WSS# clear dot1x max-req

success: change accepted.

See Also

•set dot1x max-req on page 501

•show dot1x on page 507

NN47250-100 (Version 02.51)