Nortel Networks 2300 Series manual Set trace dot1x, Level 5 is the default

572Trace Commands

Syntax set trace authorization [mac-addr mac-address] [port port-num] [user username] [level level]

mac-addrmac-address	Traces a MAC address. Specify a MAC address, using colons
	to separate the octets (for example, 00:11:22:aa:bb:cc).
port port-num	Traces a port number. Specify a WSS port number between 1
	and 22.
user username	Traces a user. Specify a username of up to 80 alphanumeric
	characters with no spaces.
level level	Determines the quantity of information included in the output.
	You can set the level with an integer from 1 to 10, where level
	10 provides the most information. Levels 1 through 5 provide
	user-readable information. If you do not specify a level,
	level 5 is the default.

Defaults The default trace level is 5. Access Enabled.

Examples The following command starts a trace for information for authorization for MAC address 00:01:02:03:04:05:

WSS# set trace authorization mac-addr 00:01:02:03:04:05 success: change accepted.

See Also

•clear trace on page 560

•show trace on page 564

set trace dot1x

Traces 802.1X sessions.

Syntax set trace dot1x [mac-addr mac-address] [port port-num] [user username] [level level]

mac-addrmac-address	Traces a MAC address. Specify a MAC address, using colons
	to separate the octets (for example, 00:11:22:aa:bb:cc).
port port-num	Traces a port number. Specify a WSS port number between 1
	and 22.
user username	Traces a user. Specify a username of up to 80 alphanumeric
	characters with no spaces.
level level	Determines the quantity of information included in the output.
	You can set the level with an integer from 1 to 10, where level
	10 provides the most information. Levels 1 through 5 provide
	user-readable information. If you do not specify a level,
	level 5 is the default.

NN47250-100 (Version 02.51)