Nortel Networks 2300 Series manual Set radio-profile countermeasures, Rogue, Configured

AP Commands 297

set radio-profile countermeasures

Caution! Countermeasures affect wireless service on a radio. When an AP radio is sending countermeasures, the radio is disabled for use by network traffic, until the radio finishes sending the countermeasures.

Enables or disables countermeasures on the AP radios managed by a radio profile. Countermeasures are packets sent by a radio to prevent clients from being able to use rogue access points.

AP radios can also issue countermeasures against interfering devices. An interfering device is not part of the Nortel network but also is not a rogue. No client connected to the device has been detected communicating with any network entity listed in the forwarding database (FDD) of any WSS in the Mobility Domain. Although the interfering device is not connected to your network, the device might be causing RF interference with AP radios.

Syntax set radio-profile name countermeasures {all rogue configured none}

name	Radio profile name.
all	Configures radios to attack rogues and interfering devices.
rogue	Configures radios to attack rogues only.
configured	Configures radios to attack only devices in the attack list on the WSS (on-
	demand countermeasures). When this option is specified, devices found to
	be rogues by other means, such as policy violations or by determining that
	the device is providing connectivity to the wired network, are not
	attacked.
none	Disables countermeasures for this radio profile.
Defaults Countermeasures are disabled by default.
Access Enabled.
History
Version 4.0	Command introduced.
Version 4.1	New option configured added to support on-demand
	countermeasures.

Examples The following command enables countermeasures in radio profile radprof3 for rogues only:

WSS# set radio-profile radprof3 countermeasures rogue

success: change accepted.

Nortel WLAN—Security Switch 2300 Series Command Line Reference