Nortel Networks 2300 Series manual Set ip ssh server, WSS# set ip ssh port

IP Services Commands 129

Examples The following command changes the SSH port number on a WSS to 6000:

WSS# set ip ssh port 6000

success: change accepted.

See Also

•set ip ssh server on page 119

•set ip ssh server on page 119

•set ip ssh server on page 119

set ip ssh server

Disables or reenables the SSH server on a WSS.

Caution! If you disable the SSH server, SSH access to the WSS is also disabled.

Syntax set ip ssh server {enable disable}

enable	Enables the SSH server.
disable	Disables the SSH server.

Defaults The SSH server is enabled by default. Access Enabled.

Usage SSH requires an SSH authentication key. You can generate one or allow WSS Software to generate one. The first time an SSH client attempts to access the SSH server on a WSS, the switch automatically generates a 1024-byte SSH key. If you want to use a 2048-byte key instead, use the crypto generate key ssh 2048 command to generate one.

The maximum number of SSH sessions supported on a WSS is eight. If Telnet is also enabled, the switch can have up to eight Telnet or SSH sessions, in any combination, and one Console session.

See Also

•crypto generate key on page 472

•set ip ssh on page 118

•set ip ssh server on page 119

•set ip ssh server on page 119

Nortel WLAN—Security Switch 2300 Series Command Line Reference