Nortel Networks 2300 Series manual Show port-group, Output for show port-group

Port Commands 57

Usage You can specify one statistic type with the command.

Examples The following command shows octet statistics for port 3:

WSS> show port counters octets port 3

Port Status Rx OctetsTx Octets

=============================================================================

3 Up 27965420 34886544

This command’s output has the same fields as the monitor port counters command. For descriptions of the fields, see Table 3 on page 30.

See Also

•clear port counters on page 24

•monitor port counters on page 28

show port-group

Displays port group information.

Syntax show port-group [name group-name]

name group-nameDisplays information for the specified port group.

Defaults	None.
Access All.
History
Version 4.1	Option all removed for simplicity. You can display information
	for all groups by entering the command without specifying a
	group name.

Examples The following command displays the configuration of port group server2:

WSS# show port-group name server2

Port group: server2 is up

Ports: 15, 17

Table 6 describes the fields in the show port-groupoutput.

	Table 6: Output for show port-group
Field	Description
Port group	Name and state (enabled or disabled) of the port group.
Ports	Ports contained in the port group.

Nortel WLAN—Security Switch 2300 Series Command Line Reference