Nortel Networks 2300 Series True-Security ACLs are mapped, False-No security ACLs are mapped

Security ACL Commands 477

Table 1: show security acl resource-usage Output (continued)

Field	Description
Port number	Control value for handling fragmented IP packets.
	Note: The current WSS Software version filters only the first packet of a
	fragmented IP packet and passes the remaining fragments.
Number of action types	Number of actions that can be performed by ACLs. This value is always
	2, because ACLs can either permit or deny.
LUdef in use	Number of the lookup definition (LUdef) table currently in use for packet
	handling.
Default action pointer	Memory address used for packet handling, from which default action data
	is obtained when necessary.
L4 global	Security ACL mapping on the WSS:
	• True—Security ACLs are mapped.
	• False—No security ACLs are mapped.
No rules	Security ACE rule mapping on the WSS:
	• True—No security ACEs are mapped.
	• False—Security ACEs are mapped.
Non-IP rules	Non-IP security ACE mapping on the WSS:
	• True—Non-IP security ACEs are mapped.
	• False—Only IP security ACEs are mapped.
	Note: The current WSS Software version supports security ACEs for IP
	only.
Root in first	Leaf buffer allocation:
	• True—Enough primary leaf buffers are allocated in
	nonvolatile memory to accommodate all leaves.
	• False—Insufficient primary leaf buffers are allocated in
	nonvolatile memory to accommodate all leaves.
Static default action	Definition of a default action:
	• True—A default action types is defined.
	• False—No default action type is defined.
No per-user (MAC)	Per-user application of a security ACL with the Filter-Id attribute, on the
mapping	WSS:
	• True—No security ACLs are applied to users.
	• False—Security ACLs are applied to users.
Out mapping	Application of security ACLs to outgoing traffic on the WSS:
	• True—Security ACLs are mapped to outgoing traffic.
	• False—No security ACLs are mapped to outgoing
	traffic.

Nortel WLAN—Security Switch 2300 Series Command Line Reference