Nortel Networks 2300 Series manual Show ap group, Show ap mesh-links, WSS# show ap mesh-links

AP Commands 367

Table 11: Output for show ap etherstats (continued)

Field	Description
TxLateColl	Number of frames that were not transmitted because they
	encountered a collision outside the normal collision window.
TxMaxColl	Number of frames that were not transmitted because they
	encountered the maximum allowed number of collisions.
	Typically, this occurs only during periods of heavy traffic on the
	network.
TxMultiColl	Number of transmitted frames that encountered more than one
	collision.
TxUnderruns	Number of frames that were not transmitted or retransmitted due
	to temporary lack of hardware resources.
TxCarrierLoss	Number of frames transmitted despite the detection of a
	deassertion of CRS during the transmission.
TxDeferred	Number of frames deferred before transmission due to activity on
	the link.

show ap group

Deprecated in WSS Software Version 6.0. To display information about RF load balancing, see show load-balancing group

show ap mesh-links

Displays information about the links an AP has to Mesh APs and Mesh Portal APs.

Syntax show ap mesh-links ap-number

ap-number Index value that identifies the AP on the WSS.

Defaults None.

Access All

History Introduced in WSS Software Version 6.0.

Examples The following command mesh link information for AP 7:

WSS# show ap mesh-links 7

AP: 7 IP-addr: 1.1.1.3

Operational Mode: Mesh-Portal

Downlink Mesh-APs

-------------------------------------------------

BSSID: 00:0b:0e:17:bb:3f (54 Mbps)

packets bytes

Nortel WLAN—Security Switch 2300 Series Command Line Reference