Nortel Networks 2300 Series Clear spantree statistics, WSS# clear spantree statistics 5,11,19-22

402STP Commands

Syntax clear spantree portvlanpri port-list{all vlan vlan-id}

port-list	List of ports. The port priority is reset to 32 (the default) on the specified
	ports.
all	Resets the priority for all VLANs.
vlan vlan-id	VLAN name or number. WSS Software resets the priority for only the
	specified VLAN.
Defaults	None.

Access Enabled.

Usage WSS Software does not change a port’s priority for VLANs other than the one(s) you specify. Examples The following command resets the STP priority for port 20 in VLAN avocado:

WSS# clear spantree portvlanpri 20 vlan avocado success: change accepted.

See Also

•clear spantree portpri on page 390

•set spantree portpri on page 397

•set spantree portvlanpri on page 398

•show spantree on page 400

clear spantree statistics

Clears STP statistics counters for a network port or ports and resets them to 0.

Syntax clear spantree statistics port-list[vlan vlan-id]

port-list

vlan vlan-id

Defaults None.

List of ports. Statistics counters are reset on the specified ports.

VLAN name or number. WSS Software resets statistics counters for only the specified VLAN.

Access Enabled.

Examples The following command clears STP statistics counters for ports 5, 11, and 19 through 22, for all VLANs:

WSS# clear spantree statistics 5,11,19-22

success: change accepted.

NN47250-100 (Version 02.51)