Nortel Networks 2300 Series manual Set service-profile soda agent-directory, Network

336AP Commands

set service-profile soda agent-directory

Specifies the directory on the WSS where the SODA agent files for a service profile are located.

Syntax set service-profile name soda agent-directory directory

name	Service profile name.
directory	Directory on the WSS for SODA agent files.

Defaults By default, the WSS expects SODA agent files to be located in a directory with the same name as the service profile.

Access Enabled.

History Introduced in WSS Software Version 4.1.

Usage If the same SODA agent is used for multiple service profiles, you can use this command to specify a single directory for SODA agent files on the WSS, rather than placing the same SODA agent files in a separate directory for each service profile.

Examples The following command specifies soda-agentas the location for SODA agent files for service profile sp1:

WSS# set service-profile sp1 soda agent-directory soda-agent

success: change accepted.

See Also

•install soda agent on page 542

•uninstall soda agent on page 556

•show service-profile on page 380

set service-profile soda enforce-checks

Specifies whether a client is allowed access to the network after it has downloaded and run the SODA agent security checks.

Syntax set service-profile name enforce-checks {enable disable}

name	Service profile name.
enable	SODA agent checks are performed before the client is allowed access to
	the network.
disable	Allows the client access to the network immediately after the SODA
	agent is downloaded, without waiting for the checks to be run.

Defaults By default, SODA agent checks are performed before the client is allowed access to the network.

NN47250-100 (Version 02.51)