Nortel Networks 2300 Series Load config, WSS# install soda agent soda.ZIP agent-directory sp1

	File Management Commands 553
Syntax install soda agent agent-fileagent-directory directory
agent-file	Name of a .zip file on the WSS containing SODA agent files.
directory	Directory on the WSS where SODA agent files are to be installed. The
	command automatically creates this directory.
Defaults	None.
Access	Enabled.

History Introduced in WSS Software Version 4.1.

Usage Use this command to install a .zip file containing SODA agent files into a directory on the WSS. Prior to installing the SODA agent files, you must have already copied the .zip file to the WSS. This command creates the specified directory, unzips the file and places the contents into the directory. If the specified directory has the same name as an SSID, then that SSID uses the SODA agent files in the directory if SODA functionality is enabled for the service profile that manages the SSID.

Examples The following command installs the contents of the file soda.ZIP into a directory called sp1.

WSS# install soda agent soda.ZIP agent-directory sp1

This command may take up to 20 seconds...

WSS#

See Also

•uninstall soda agent on page 556

•set service-profile soda mode on page 329

load config

Caution! This command completely removes the running configuration and replaces it with the configuration contained in the file. Nortel recommends that you save a copy of the current running configuration to a backup configuration file before loading a new configuration.

Loads configuration commands from a file and replaces the WSS’s running configuration with the commands in the loaded file.

Syntax load config [url]

url	Filename. Specify between 1 and 128 alphanumeric characters, with no
	spaces.
	If the file is in a subdirectory, specify the subdirectory name, followed by
	a forward slash, in front of the filename. For example: backup_configs/
	config_c.

Nortel WLAN—Security Switch 2300 Series Command Line Reference