Nortel Networks 2300 Series manual WSS# show fdb all

92VLAN Commands

mac-addr-wildcard		A single MAC address or set of MAC addresses. Specify a MAC address,
		or use the wildcard character (*) to specify a set of MAC addresses. (For
		details, see “MAC Address Wildcards” on page 13.)
vlan vlan-id		Name or number of a VLAN for which to display entries.
perm		Displays permanent entries. A permanent entry does not age out and
		remains in the database even after a reboot, reset, or power cycle.
static		Displays static entries. A static entry does not age out, but is removed
		from the database after a reboot, reset, or power cycle.
dynamic		Displays dynamic entries. A dynamic entry is automatically removed
		through aging or after a reboot, reset, or power cycle.
system		Displays system entries. A system entry is added by WSS Software. For
		example, the authentication protocols can add entries for wired and
		wireless authentication users.
all		Displays all entries in the database, or all the entries that match a
		particular port or ports or a particular VLAN.
port port-list		Destination port(s) for which to display entries.
Defaults	None.
Access	All.

Usage To display the entire forwarding database, enter the show fdb command without options. To display only a portion of the database, use optional parameters to specify the types of entries you want to display.

Examples The following command displays all entries in the forwarding database:

WSS# show fdb all

* = Static Entry. + = Permanent Entry. # = System Entry.	[Protocol Type]
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports

---- ---- ------------------ ----- -------------------------------------------------------------------

1	00:01:97:13:0b:1f	*	1	[ALL]
1	aa:bb:cc:dd:ee:ff		3	[ALL]
1	00:0b:0e:02:76:f5		1	[ALL]

Total Matching FDB Entries Displayed = 3

The top line of the display identifies the characters to distinguish among the entry types. The following command displays all entries that begin with the MAC address wildcard 00:

WSS# show fdb 00:*

* = Static Entry. + = Permanent Entry. # = System Entry.			[Protocol Type]
VLAN TAG	Dest MAC/Route Des [CoS]	Destination Ports
---- ---- ------------------ ----- -----------------------------------------------------------
1	00:01:97:13:0b:1f	1	[ALL]
1	00:0b:0e:02:76:f5	1	[ALL]

Total Matching FDB Entries Displayed = 2

Table 11 describes the fields in the show fdb output.

NN47250-100 (Version 02.51)