Nortel Networks 2300 Series manual Set web-portal, Syntax set web-portal enable disable

AAA Commands 219

Syntax set usergroup group-name attr attribute-name value

group-name		Name of a group for password users. Specify a name of up to
		32 alphanumeric characters, with no spaces. The name must begin
		with an alphabetic character.
attribute-name value		Name and value of an attribute you are using to authorize all users
		in the group for a particular service or session characteristic. For a
		list of authorization attributes and values that you can assign to
		users, see Table 29 on page 198.
Defaults	None.
Access	Enabled.

Usage To change the value of an attribute, enter set usergroup attr with the new value. To delete an attribute, use clear usergroup attr.

To add a user to a group, user the command set user group.

You can assign attributes to individual users and to user groups. If attributes are configured for a user and also for the group the user is in, the attributes assigned to the individual user take precedence for that user. For example, if the start- date attribute configured for a user is sooner than the start-date configured for the user group the user is in, the user’s network access can begin as soon as the user start-date. The user does not need to wait for the user group’s start date.

Examples The following command adds the user group cardiology to the local database and assigns all the group members to VLAN crimson:

WSS# set usergroup cardiology attr vlan-name crimson success: change accepted.

See Also

• clear usergroup on page 177

• clear usergroup attr on page 178

• show aaa on page 210

set web-portal

Globally enables or disables Web-based AAA on a WSS.

Syntax set web-portal {enable disable}

enable	Enables Web-based AAA on the switch.
disable	Disables Web-based AAA on the switch.
Defaults	Enabled.
Access	Enabled.

Nortel WLAN—Security Switch 2300 Series Command Line Reference