PYLE Audio SIP 3.2.1 manual To disable call forwarding

Using the Basic Features of Your SoundPoint IP 32x/33x Phone

3.Using and , select the forwarding type you want to change and

then press . The options are:

—Always—For all incoming calls

—No Answer—Once all options to accept calls have been taken

—Busy—When you are already in a call

4.Depending on your selection:

a If you select Always, enter a number to forward all future incoming calls to.

b If you select No Answer, enter a number to forward all unanswered incoming calls to and how many rings to wait before forwarding (one ring is approximately six seconds). A value of 2 is recommended.

c If you select Busy, enter a number to forward all future incoming calls to when you are already in another call.

Note	You can also enter the SIP URL or IP address. For more information on using a SIP
	URL or IP address, refer to Placing a Call on page 3-2

5.Select the Enable soft key to confirm call forwarding. Select the Exit soft key to cancel any changes.

The idle display returns with a moving arrow as the line label to confirm call forwarding is enabled.

To disable call forwarding:

1.Press and select Features > Forward.

2.(Optional) If multiple lines are configured on your phone, select the line

to forward from the list using and .

3.Using and , select the forwarding type you want to change and then press the Select soft key.

4.Press the Disable soft key to turn off call forwarding.

The idle display returns and the regular icon appears as the line indicator.

3 - 13