Nortel Networks 2300 Series manual Session Management Commands, Clear sessions

445

Session Management Commands

Use session management commands to display and clear administrative and network user sessions. This chapter

presents session management commands alphabetically. Use the following table to locate commands in this chapter based on their use.

Administrative Sessions	show sessions on page 437
	clear sessions on page 435
Network Sessions	show sessions network on page 439
	clear sessions network on page 436

clear sessions

Clears all administrative sessions, or clears administrative console or Telnet sessions.

Syntax clear sessions {admin console telnet [client [session-id]]}

admin		Clears sessions for all users with administrative access to the WSS
		through a Telnet or SSH connection or a console plugged into the switch.
console		Clears sessions for all users with administrative access to the WSS
		through a console plugged into the switch.
telnet		Clears sessions for all users with administrative access to the WSS
		through a Telnet connection.
telnet client [session-		Clears all Telnet client sessions from the CLI to remote devices, or clears
id]		an individual session identified by session ID.
Defaults	None.
Access	Enabled.

Examples To clear all administrator sessions type the following command:

WSS# clear sessions admin

This will terminate manager sessions, do you wish to continue? (yn) [n]y

To clear all administrative sessions through the console, type the following command:

WSS# clear sessions console

This will terminate manager sessions, do you wish to continue? (yn) [n]y

To clear all administrative Telnet sessions, type the following command:

WSS# clear sessions telnet

This will terminate manager sessions, do you wish to continue? (yn) [n]y

Nortel WLAN—Security Switch 2300 Series Command Line Reference