Nortel Networks 2300 Series manual Output for show port poe, See Also set port poe on

60Port Commands

9 9		up	AP	enabled	1.44
10	10	up	-	disabled	off
11	11	down	-	disabled	off
12	12	down	-	disabled	off
13	13	down	-	disabled	off
14	14	down	-	disabled	off
15	15	down	-	disabled	off
16	16	down	-	disabled	off
17	17	down	-	disabled	off
18	18	down	-	disabled	off
19	19	down	-	disabled	off
20	20	down	-	disabled	off
21	21	down	-	disabled	invalid
22	22	down	-	disabled	invalid

Table 8 describes the fields in this display.

	Table 8: Output for show port poe
Field	Description
Port	Port number.
Name	Port name. If the port does not have a name, the port number is
	listed.
Link status	Link status of the port:
	• up—The port is connected.
	• down—The port is not connected.
Port type	Port type:
	• AP—The port is an access port.
	• - (The port is not an AP.)
PoE config	PoE state:
	•	enabled
	•	disabled
PoE Draw	Power draw on the port, in watts.
	For 10/100 Ethernet ports on which PoE is disabled, this field
	displays off. For gigabit Ethernet ports, this field displays invalid,
	because PoE is not supported on gigabit Ethernet ports.

The value overcurrent indicates a PoE problem such as a short in the cable.

See Also set port poe on page 39

NN47250-100 (Version 02.51)