Nortel Networks 2300 Series manual Show mobility-domain Output, Syntax show mobility-domain

Mobility Domain Commands 233

Syntax show mobility-domain

Defaults	None.
Access	Enabled.
History Upgraded in WSS Software Version 6.0.
Examples To display Mobility Domain status, type the following command:
WSS# show mobility-domain
Mobility Domain name: Santa Clara
Member		State	Type (* active)	Model	Version
---------------		-------------------------	-------------------------	---------------------	---------------
192.168.253.11		STATE_DOWN	Seed	Unknown	Unknown
192.168.253.12		STATE_UP	Secondary seed *	2360	6.0.3.0

Table 32 describes the fields in the display.

Table 1: show mobility-domain Output

Field	Description
Mobility Domain name	Name of the Mobility Domain
Member	IP addresses of the seed WSS and members in the Mobility
	Domain
State	State of the WSS in the Mobility Domain:
	•	STATE_UP
	•	STATE_DOWN
Status	Role of the WSS in the Mobility Domain:
	•	MEMBER
	•	SEED

See Also

•clear mobility-domain on page 218

•set mobility-domain member on page 219

•set mobility-domain mode member seed-ip on page 220

Nortel WLAN—Security Switch 2300 Series Command Line Reference