Nortel Networks 2300 Series manual Clear dot1x reauth-period, Clear dot1x timeout auth-server

508802.1X Management Commands

Access Enabled.

History Introduced in WSS Software 1.0.

Examples Type the following command to reset the maximum number of reauthorization attempts to the default:

WSS# clear dot1x reauth-max

success: change accepted.

See Also

•set dot1x reauth-max on page 504

•show dot1x on page 507

clear dot1x reauth-period

Resets the time period that must elapse before a reauthentication attempt, to the default time period.

Syntax clear dot1x reauth-period

Defaults The default is 3600 seconds (1 hour). Access Enabled.

History Introduced in WSS Software 1.0.

Examples Type the following command to reset the default reauthentication time period:

WSS# clear dot1x reauth-period

success: change accepted.

See Also

•set dot1x reauth-period on page 504

•show dot1x on page 507

clear dot1x timeout auth-server

Resets to the default setting the number of seconds that must elapse before the WSS times out a request to a RADIUS server.

Syntax clear dot1x timeout auth-server

Defaults The default is 30 seconds. Access Enabled.

History Introduced in WSS Software 1.0.

Examples To reset the default timeout for requests to an authentication server, type the following command:

WSS# clear dot1x timeout auth-server

success: change accepted.

NN47250-100 (Version 02.51)