Printer Driver Chapter 4
DOS Printing Utilities
Page Protection
Page Protection allows the printer to process the data for the entire document before it is printed. When Auto is selected, the printer ana- lyzes each page and turns on Page Protection automatically only when it is required. Selecting On always keeps sufficient memory reserved to ensure that a page can be fully composed.
I/O Timeout
The value you select in this box specifies the number of seconds the printer waits for data. The printer automatically cancels the print job if data does not arrive within the time you specify here.
Using the Status Display
This section describes how to display the Status Display and make changes in the operating environment of the Status Display.
To Display the Status Display
After the Status Display is loaded, perform the required hot key combi- nation (a combination of keys you press at the same time to perform an operation) to display the Status Display. The following is the default hot key combination.
[ctl]+[alt]+[R]
You can change the hot key combination after the Status Display screen appears.
To select an item on the Status Display, first highlight it and then press Enter to advance to its setting screen. You can clear the Status Display at any time by pressing Esc.
The following is a brief explanation of the items that are available on the Status Display. Further information can be found in the Status Dis- play’s online help.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
