Replacing the Drum Cartridge
To Reset the Counter of the Drum Cartridge
Perform the following procedure to reset the drum cartridge counter after you replace the drum cartridge.
1
2 Keep the panel button held down, and the Ready indicator will start to blink. After the Ready indicator has blinked for about 5 seconds, release the panel button. This should cause all the indicators to start to blink.
3 After confirming that all the indicators are blinking, briefly press the panel button. This causes the Error indicator to blink and all the other indicators to turn off.
4 After a few seconds, all the indicators start to blink again, indi- cating that the drum cartridge counter has been reset.
5 Turn off the printer. The printer will be ready to print the next time you turn it on.
Maintenance Chapter 6
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
