DOS Printing Utilities
To Load the Status Monitor from the DOS Prompt
Type the following at the DOS prompt to display the Status Monitor screen:
1 Change to the directory you created under “Installing DOS Printing Utilities” on page
Type: cd c:\mltdos↵
•If you used the directory name we showed in our installation example, type in the command exactly as shown above. If you used a different directory name, change mltdos to the name you used.
2 Type the following command at the DOS prompt. Type: rep↵
To Remove the Status Monitor from Memory
■Type the following at the DOS prompt:
Rep /d↵
Note
◆You should use the above step to remove the Status Monitor from memory if the Status Monitor is interfering with one of your other software applications or if you need to free up the memory used by the Status Monitor.
Printer Driver Chapter 4
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
