Using the Control Panel
Paper
Paper Time Out
The printer automatically goes into a “paper time out” standby state after about 10 minutes of inactivity in the Manual Feed mode, or when a Paper Size Error occurs. Use this setting to specify what the printer should do after it enters the paper time out state.
Proceed: Selecting this option tells the printer to proceed with the job, using paper from Tray1.
Clear: Selecting this option tells the printer to cancel the current print job.
None: This option tells the printer to do nothing and stand by until paper is fed manually or until it receives a command to cancel the cur- rent print job.
Tray1 Setting
Multipurpose Tray
Selecting this option defines Tray1 as a multipurpose tray, which means that Tray1 supports any paper size.
Printer Status Monitor and Control Panel Chapter 5
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
