
Turn off the printer.
While holding down the panel button, turn on the printer.
Using the Panel Button
Using the Panel Button
The panel button can be used to perform various operations according to the status of the printer.
Panel button
Counter Reset Mode
Use the following procedure whenever you want to reset the counter.
1
2
3 Keep the panel button held down, and the Ready indicator will start to blink. After the Ready indicator has blinked for about 5 seconds, release the panel button. This should cause all the indicators to start to blink.
4 After all the indicators blink, the printer enters the counter reset mode. See “To Reset the Counter of the Toner Cartridge” on page
Using the Printer Chapter 3
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500