DTV
When scanning DTV
1Select digital mode by pressing [DTV/TV].
2Display the menu screen.
•Press [MENU].
The following menu screen is displayed.
PICTURE CHANNEL SET [ENG]/ESP/FRA
3Select "CHANNEL SET".
• Using [CH K/L], select "CHANNEL SET".
PICTURE
CHANNEL SET [ENG]/ESP/FRA
• Press [VOL X].
4Using [CH K/L], select "AUTO PRESET CH(DTV)".
ADD/DELETE(DTV)
AUTO PRESET CH(DTV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
DTV TV
When scanning both TV and DTV at the same time
*You can access this menu from both modes (analog / digital).
1Display the menu screen and select "CHANNEL SET".
•Press [MENU] and select "CHANNEL SET" using [CH K/L].
PICTURE
CHANNEL SET [ENG]/ESP/FRA
• Press [VOL X].
2Using [CH K/L], select "AUTO PRESET CH(TV/DTV)".
ADD/DELETE(DTV)
AUTO PRESET CH(DTV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
!CATV takes approx. 50min.
•Press [VOL X].
Scanning and memorizing the channels auto- matically starts.
53
AUTO PRESET CH(TV/DTV)
OTHER SETTINGS
•Press [VOL X].
Scanning and memorizing the channels auto- matically starts.
D28
AUTO PRESET CH(DTV)
•When the scanning and memorizing are com- pleted, the smallest memorized channel in the digital broadcasting will be displayed.
•When the scanning and memorizing are com- pleted, the memorized smallest channel in the analog broadcasting will be displayed. If no analog channel is memorized, the smallest memorized channel in the digital broadcasting will be displayed.
NOTES:
•If you press [POWER] or [MENU] while setting AUTO PRE- SET CH, AUTO PRESET CH setting will be canceled.
•If there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of channel scanning.
NO TV SIGNALS
29
EN
