OTHER SETTINGS
AUTO PRESET CH
If you switch wires (e.g. between antenna and CATV) or if you move the TV to a different area after the initial setting, or if you need to add the DTV channel you deleted, you will need to perform AUTO PRESET CH again. This function lets you easily select the receivable channels with [CH K/L] and the TV memorizes them even if you switch wires.
POWER |
| DTV / TV | |
|
|
| DTV/TV |
|
| AUDIO | INFO |
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 |
|
| CHANNEL | ||
| RECALL | ||
CH K / L | 0 | +100 |
|
| CH |
| |
|
| VOL X | |
| VOL | VOL | |
|
| CH |
|
MENU | INPUT |
|
|
MENU | SELECT | SLEEP | MUTE |
NOTE:
•Make sure if the TV is connected to antenna or cable. When aerial antenna is connected, select “AUTO PRE- SET CH (TV)” or “ AUTO PRESET CH (TV/DTV)” at step 4. When connected to CATV, select “AUTO PRESET CH (CATV)”.
TV
When scanning TV or CATV
1Select analog mode by pressing [DTV/TV].
4For TV channels
•Using [CH K/L], select "AUTO PRESET CH(TV)".
ADD/DELETE
AUTO PRESET CH(TV)
AUTO PRESET CH(CATV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
!CATV takes approx. 50min.
•Press [VOL X].
Scanning and memorizing the channels auto- matically starts.
37
AUTO PRESET CH(TV)
•When the scanning and memorizing are com- pleted, the lowest memorized channel in the analog broadcasting will be displayed.
4For CATV channels
•Using [CH K/L], select "AUTO PRESET CH(CATV)".
ADD/DELETE
AUTO PRESET CH(TV) 
AUTO PRESET CH(CATV)
AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
2Display the menu screen.
•Press [MENU].
The following menu screen is displayed.
PICTURE CHANNEL SET [ENG]/ESP/FRA
3Select "CHANNEL SET".
• Using [CH K/L], select "CHANNEL SET".
PICTURE
CHANNEL SET [ENG]/ESP/FRA
•Press [VOL X].
Scanning and memorizing the channels auto- matically starts.
37
AUTO PRESET CH(CATV)
•When the scanning and memorizing are com- pleted, the smallest memorized channel in the CATV will be displayed.
• Press [VOL X].
28
EN
