Nortel Networks 2300 Series manual Commit security acl, WSS# clear security acl map all

462Security ACL Commands

To clear all physical ports, virtual ports, and VLANs on a WSS of the ACLs mapped for incoming and outgoing traffic, type the following command:

WSS# clear security acl map all

success: change accepted.

See Also

•clear security acl on page 449

•set security acl map on page 459

•show security acl map on page 464

commit security acl

Saves a security ACL, or all security ACLs, in the edit buffer to the running configuration and nonvolatile storage on the WSS. Or, when used with the clear security acl command, commit security acl deletes a security ACL, or all security ACLs, from the running configuration and nonvolatile storage.

Syntax commit security acl {acl-nameall}

acl-name	Name of an existing security ACL to commit. ACL names must start with
	a letter and are case-insensitive.
all	Commits all security ACLs in the edit buffer.
Defaults	None.
Access	Enabled.

Usage Use the commit security acl command to save security ACLs into, or delete them from, the permanent configuration. Until you commit the creation or deletion of a security ACL, it is stored in an edit buffer and is not enforced. After you commit a security ACL, it is removed from the edit buffer.

A single commit security acl all command commits the creation and/or deletion of whatever show security acl info all editbuffer shows to be currently stored in the edit buffer.

Examples The following commands commit all the security ACLs in the edit buffer to the configuration, display a summary of the committed ACLs, and show that the edit buffer has been cleared:

WSS# commit security acl all configuration accepted

WSS# show security acl

ACL table

ACL	Type Class Mapping
-----------------------	----	------ -------
acl_123	IP	Static
acl_124	IP	Static

WSS# show security acl info all editbuffer

acl editbuffer information for all

NN47250-100 (Version 02.51)