Nortel Networks 2300 Series Nonvolatile storage area containing boot, Partition, Flash card slot

608Boot Prompt Commands

	Table 1: Output for show (continued)
Field	Description
DEVICE	Location of the system image file:
	• c:—Nonvolatile storage area containing boot
		partition 0
	• d:—Nonvolatile storage area containing boot
		partition 1
	• e:—Primary partition of the flash card in the flash
		card slot
	• f:—Secondary partition of the flash card in the
		flash card slot
	•	boot0—boot partition 0
	•	boot1—boot partition 1
	When the boot type is Network, the device can be one of the
	following:
	• emac1—Port 1 on a 2350
	• emac2—Port 2 on a 2350
	• mgmt or tsec0—The 10/100 port labelled Mgmt
		on an 2382
HOST IP	For network booting, the IP address of the host where the system
	image resides
LOCAL IP	For network booting, the IP address of the WSS. If the DHCP
	option is enabled, this does not need to be specified.
GATEWAY IP	For network booting, the default router (gateway) used by the
	WSS. If the DHCP option is enabled, this does not need to be
	specified.
IP MASK	For network booting, the subnet mask. If the DHCP option is
	enabled, this does not need to be specified.
FILENAME	System image file name.
FLAGS	Number representing the bit settings of boot flags to pass to the
	booted system image.
OPTIONS	String up to 128 bytes of boot options to pass to the booted
	system image.

See Also

•change on page 588

•create on page 590

•delete on page 590

•dhcp on page 591

NN47250-100 (Version 02.51)