Nortel Networks 2300 Series manual Show igmp mrouter, Syntax show igmp mrouter vlan vlan-id

436IGMP Snooping Commands

Table 1: Output for show igmp (continued)

Field	Description
TTL	Number of seconds before this entry ages out if the WSS does
	not receive a query message from the querier.
IGMP vlan member ports	Physical ports in the VLAN. This list includes all network ports
	configured to be in the VLAN and all ports WSS Software
	dynamically assigns to the VLAN when a user assigned to the
	VLAN becomes a receiver. For example, the list can include an
	AP access port that is not configured to be in the VLAN when a
	user associated with the AP on that port becomes a receiver for a
	group. When all receivers on a dynamically added port age out,
	WSS Software removes the port from the list.
IGMP static ports	Static receiver ports.
IGMP statistics	Multicast message and packet statistics. These are the same
	statistics displayed by the show igmp statistics command.

See Also

•show igmp mrouter on page 426

•show igmp querier on page 427

•show igmp receiver-table on page 429

•show igmp statistics on page 431

show igmp mrouter

Displays the multicast routers in a WSS’s subnet, on one VLAN or all VLANs. Routers are listed separately for each VLAN, according to the port number through which the switch can reach the router.

Syntax show igmp mrouter [vlan vlan-id]

vlan vlan-id	VLAN name or number. If you do not specify a VLAN, WSS Software
	displays the multicast routers in all VLANs.

Defaults None.

Access All.

Examples The following command displays the multicast routers in VLAN orange:

WSS# show igmp mrouter vlan orange
Multicast routers for vlan orange
Port	Mrouter-IPaddr Mrouter-MAC		Type TTL
---- --------------- ----------------- ----- ---------------			----
10	192.28.7.5	00:01:02:03:04:05 dvmrp 33

Table 64 describes the fields in this display.

NN47250-100 (Version 02.51)