Nortel Networks 2300 Series manual Clear mobility-domain member, Set domain security

228Mobility Domain Commands

clear mobility-domain

Clears all Mobility Domain configuration and information from a WSS, regardless of whether the WSS is a seed or a member of a Mobility Domain.

Syntax clear mobility-domain

Defaults None.

Access Enabled.

Usage This command has no effect if the WSS is not configured as part of a Mobility Domain. Examples To clear a Mobility Domain from a WSS within the domain, type the following command:

23x0# clear mobility-domain

success: change accepted.

See Also

•clear mobility-domain member on page 218

•set mobility-domain member on page 219

•set mobility-domain mode member seed-ip on page 220

clear mobility-domain member

On the seed WSS, removes the identified member from the Mobility Domain.

Syntax clear mobility-domain member ip-addr

ip-addr IP address of the Mobility Domain member, in dotted decimal notation.

Defaults None.

Access Enabled.

Usage This command has no effect if the WSS member is not configured as part of a Mobility Domain or the current WSS is not the seed.

Examples The following command clears a Mobility Domain member with the IP address 192.168.0.1:

23x0# clear mobility-domain member 192.168.0.1

See Also set mobility-domain member on page 219

set domain security

Enables WSS-WSSsecurity in the WSS’s Mobility Domain.

NN47250-100 (Version 02.51)