Nortel Networks 2300 Series Clear vlan, WSS# clear security l2-restrict counters vlan abcair

86VLAN Commands

Defaults If you do not specify a VLAN or all, counters for all VLANs are cleared. Access Enabled.

History Introduced in WSS Software Version 4.1.

Usage To clear MAC addresses from the list of addresses to which clients are allowed to send data, use the clear security l2-restrictcommand instead.

Examples The following command clears Layer 2 forwarding restriction statistics for VLAN abc_air:

WSS# clear security l2-restrict counters vlan abc_air

success: change accepted.

See Also

•clear security l2-restrict on page 75

•set security l2-restrict on page 78

•show security l2-restrict on page 87

clear vlan

Removes physical or virtual ports from a VLAN or removes a VLAN entirely.

Caution! When you remove a VLAN, WSS Software completely removes the VLAN from the configuration and also removes all configuration information that uses the VLAN. If you want to remove only a specific port from the VLAN, make sure you specify the port number in the command.

Syntax clear vlan vlan-id [port port-list [tag tag-value]]

vlan-id

port port-list

VLAN name or number.

List of physical ports. WSS Software removes the specified ports from the VLAN. If you do not specify a list of ports, WSS Software removes the VLAN entirely.

tag tag-value	Tag number that identifies a virtual port. WSS Software removes only the
	specified virtual port from the specified physical ports.

Defaults None.

Access Enabled.

Usage If you do not specify a port-list, the entire VLAN is removed from the configuration.

Note. You cannot delete the default VLAN but you can remove ports from it. To remove ports from the default VLAN, use the port port-listoption.

NN47250-100 (Version 02.51)