Nortel Networks 2300 Series manual Clear trace, Save trace

570Trace Commands

clear trace

Deletes running trace commands and ends trace processes.

Syntax clear trace {trace-areaall}

trace-area	Ends a particular trace process. Specify one of the following keywords to end
	the traces documented in this chapter:
	• authorization—Ends an authorization trace
	• dot1x—Ends an 802.1X trace
	• authentication—Ends an authentication trace
	• sm—Ends a session manager trace
all	Ends all trace processes.

Defaults None.

Access Enabled.

Examples To clear all trace processes, type the following command:

WSS# clear trace all

success: clear trace all

To clear the session manager trace, type the following command:

WSS# clear trace sm

success: clear trace sm

See Also

•set trace authentication on page 561

•set trace authorization on page 561

•set trace dot1x on page 562

•set trace sm on page 563

•show trace on page 564

save trace

Saves the accumulated trace data for enabled traces to a file in the WSS’s nonvolatile storage.

Syntax save trace filename

filename	Name for the trace file. To save the file in a subdirectory, specify the
	subdirectory name, then a slash. For example: traces/trace1

Defaults None.

Access Enabled.

NN47250-100 (Version 02.51)