Nortel Networks 2300 Series Clear service-profile, Long-retry, Short-retry, Soda agent-directory

AP Commands 253

History
Version 4.1	countermeasures parameter added.
Version 5.0	Parameters that no longer apply to radio profiles in WSS
	Software Version 4.1 removed:
	•	long-retry
	•	short-retry

Usage If you specify a parameter, the setting for the parameter is reset to its default value. The settings of the other parameters are unchanged and the radio profile remains in the configuration. If you do not specify a parameter, the entire radio profile is deleted from the configuration. All radios that use this profile must be disabled before you can delete the profile.

Examples The following commands disable the radios that are using radio profile rp1 and reset the beaconed-intervalparameter to its default value:

WSS# set radio-profile rp1 mode disable

WSS# clear radio-profile rp1 beacon-interval success: change accepted.

The following commands disable the radios that are using radio profile rptest and remove the profile:

WSS# set radio-profile rptest mode disable

WSS# clear radio-profile rptest success: change accepted.

See Also

•set ap radio radio-profile on page 271

•set radio-profile mode on page 291

•show ap config on page 344

•show radio-profile on page 376

clear service-profile

Removes a service profile or resets one of the profile’s parameters to its default value.

Syntax clear service-profile name

[soda {agent-directory failure-page remediation-acl success-page logout-page}]

name	Service profile name.
soda agent-directory	Resets the directory for Sygate On-Demand (SODA)
	agent files to the default directory. By default, the
	directory name for SODA agent files is the same as the
	service profile name.

Nortel WLAN—Security Switch 2300 Series Command Line Reference