Nortel Networks 2300 Series Mac-addr Base MAC address of the Nortel radio, Show ap status command

542RF Detection Commands

Syntax show rfdetect visible mac-addr

Syntax show rfdetect visible ap ap-num[radio {1 2}]

Syntax show rfdetect visible ap ap-num[radio {1 2}]

mac-addr	Base MAC address of the Nortel radio.
	Note: To display the base MAC address of a Nortel radio, use the
	show ap status command.
ap-num	Port connected to the AP for which to display neighboring BSSIDs.
ap-num	Number of a AP for which to display neighboring BSSIDs.
radio 1	Shows neighbor information for radio 1.
radio 2	Shows neighbor information for radio 2. (This option does not apply to
	single-radio models.)
Defaults	None.
Access Enabled.
History
Version 4.0	Vendor, Type, and Flags fields added.

Usage If a Nortel radio is supporting more than one SSID, each of the corresponding BSSIDs is listed separately.

To display rogue information for the entire Mobility Domain, use the show rfdetect mobility-domaincommand on the seed switch.

Examples To following command displays information about the rogues detected by radio 1 on AP port 3:

WSS# show rfdetect visible ap 3 radio 1

Total number of entries: 104

Flags: i = infrastructure, a = ad-hoc

c = CCMP, t = TKIP, 1 = 104-bit WEP, 4 = 40-bit WEP, w = WEP(non-WPA)

Transmit MAC Vendor Type Ch RSSI Flags SSID

----------------- ------- ----- --- ---- ------ --------------------------------

00:07:50:d5:cc:91	Cisco intfr	6	-60 i----	w r27-cisco1200-2
00:07:50:d5:dc:78	Cisco intfr	6	-82 i----	w r116-cisco1200-2
00:09:b7:7b:8a:54	Cisco intfr	2	-54 i----------	public
00:0a:5e:4b:4a:c0	3Com intfr	11	-57 i
00:0a:5e:4b:4a:c2	3Com intfr	11	-86 i-t1--	Nortelwlan
00:0a:5e:4b:4a:c4	3Com intfr	11	-85 ic----	nrtl-ccmp
00:0a:5e:4b:4a:c6	3Com intfr	11	-85 i-t---	nrtl-tkip
00:0a:5e:4b:4a:c8	3Com intfr	11	-83 i----	w nrtl-voip
00:0a:5e:4b:4a:ca	3Com intfr	11	-85 i-----	nrtl-webaaa
...

NN47250-100 (Version 02.51)