Nortel Networks 2300 Series Show security acl editbuffer, Show security acl hits, ACLType Status

472Security ACL Commands

show security acl editbuffer

Displays a summary of the security ACLs that have not yet been committed to the configuration.

Syntax show security acl [info all] editbuffer

info all	Displays the ACEs in each uncommitted ACL. Without this option, only
	the ACE names are listed.

Defaults None.

Access Enabled.

Examples To view a summary of the security ACLs in the edit buffer, type the following command:

WSS# show security acl editbuffer

ACL edit-buffer table

ACLType Status

---------------------------- ---- --------------

acl_111	IP	Not committed
acl-a	IP	Not committed

To view details about these uncommitted ACLs, type the following command.

WSS# show security acl info all editbuffer

ACL edit-buffer information for all

set security acl ip acl-111 (ACEs 3, add 3, del 0, modified 2)

----------------------------------------------------

1.permit IP source IP 192.168.254.12 0.0.0.0 destination IP any

2.permit IP source IP 192.168.253.11 0.0.0.0 destination IP any

3.deny SRC source IP 192.168.253.1 0.0.0.255

set security acl ip acl-a (ACEs 1, add 1, del 0, modified 0)

----------------------------------------------------

1.permit SRC source IP 192.168.1.1 0.0.0.0

See Also

•clear security acl on page 449

•commit security acl on page 452

•set security acl on page 454

•show security acl on page 461

•show security acl info on page 463

show security acl hits

Displays the number of packets filtered by security ACLs (“hits”) on the WSS. Each time a packet is filtered by a security ACL, the hit counter increments.

NN47250-100 (Version 02.51)