Important Safety Instructions
This symbol warns the user of dangerous voltage levels localized within the enclosure.
This symbol advises the user to read all accompanying literature for safe operation of the unit.
∆Read, retain, and follow all instructions. Heed all warnings.
∆CAUTION: No user serviceable parts inside, refer servicing to qualified personnel only.
∆WARNING: To prevent damage, fire or shock hazard, do not expose this unit to rain or moisture.
∆Do not drip nor splash liquids, nor place liquid filled containers on the unit.
∆Hazardous voltages may be present within the cabinet even when the power switch is off and the power cord is connected. Therefore, disconnect the power cord from the rear panel power inlet before servicing. The power inlet must remain readily operable.
∆This product should be located away from heat sources such as radiators, heat registers, or other products that produce heat.
∆This product should be serviced by qualified service personnel when: the power supply cord or the plug has been damaged; or objects have fallen, or liquid has been spilled onto the product; or the product has been exposed to rain; or the product does not appear to operate normally or exhibits a marked change in performance; or the product has been dropped, or the enclosure damaged.
∆This product should only be used with a cart or stand that is recommended by the manufacturer.
∆Maintain at least 6 inches (15.25 cm)of unobstructed air space behind the unit to allow for proper ventilation and cooling of the unit.
∆This product may be equipped with a polarized plug (one blade wider than the other). This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the safety purpose of this plug.
∆Only connect the power supply cord to an earth grounded AC receptacle in accordance with the voltage and frequency ratings listed under INPUT POWER on the rear panel of this product.
∆Protect the power supply cord from being pinched or abraded.
∆The power supply cord of this product should be unplugged from the outlet when left unused for a long period of time, or during electrical storms.
∆Unplug the power supply cord before cleaning the unit exterior (use a damp cloth only). Wait until the unit is completely dry before reconnecting it to power.
TYPE: | Specifications |
| |
PR 644 |
|
| |
PART NUMBER: | 4485000000 (120V, 60Hz) USA |
|
|
SCALE: | 12 note equal temperament |
|
|
RANGE: | A0 |
|
|
PRECISION: | ±1 cent |
|
|
CALIBRATION RANGE: |
| ||
POWER CONSUMPTION: | 27W |
|
|
FUSE: |
| ||
DIMENSIONS: | Height: 44mm | Width: 483mm | Depth: 190mm |
WEIGHT: | 2.5kg |
|
|
Product specifications are subject to change without notice.
A PRODUCT OF:
SWR MUSICAL INSTRUMENTS CORPORATION
CORONA, CALIFORNIA USA
SWR® and |
|
Other trademarks are property of their respective owners. |
|
© 2007 FMIC. All rights reserved. | REV. A |
www.swrsound .com
