Nortel Networks 2300 Series manual Show ap etherstats, Output for show ap qos-stats

AP Commands 365

	Table 10: Output for show ap qos-stats
Field	Description
CoS	CoS value associated with the forwarding queues.
Queue	Forwarding queue.
AP	AP number or AP port number.
or
Port
radio	Radio number.
Tx	Number of packets transmitted to the air from the queue.
TxDrop	Number of packets dropped from the queue instead of being
	transmitted.
	Some packet drops are normal, especially if the RF environment
	is noisy. Also, it is normal for a mildly congested radio to drop
	low-priority packets proportionally more often than high-priority
	packets. However, continuous packet drops from the Voice queue
	can indicate over-subscription or excessive interference in the RF
	environment.

show ap etherstats

Displays Ethernet statistics for an AP’s Ethernet ports.

Syntax show ap etherstats [port-listap-num]

port-list	List of WSS ports directly connected to the AP(s) for which to display
	counters.
ap-num	Number of a AP for which to display counters.
Defaults	None.
Access	Enabled.
History Introduced in WSS Software Version 3.0.
	Option dap removed in version 6.0.

Examples The following command displays Ethernet statistics for the Ethernet ports on AP 1:

WSS# show ap etherstats 1
AP: 1	ether: 1
=================================
RxUnicast:	75432	TxGoodFrames:	55210
RxMulticast:	18789	TxSingleColl:	32
RxBroadcast:	8	TxLateColl:	0
RxGoodFrames: 94229		TxMaxColl:	0
RxAlignErrs:	0	TxMultiColl:	47

Nortel WLAN—Security Switch 2300 Series Command Line Reference