Nortel Networks 2300 Series manual Indicates that an external antenna was detected, Radio

374AP Commands

Table 13: Output for show ap status (continued)

FieldDescription

Radio 1 type Radio 2 type (cont.)

•Radar Detected indicates that DFS has detected radar on the channel. When this occurs, the AP stops transmitting on the channel for 30 minutes. If RF Auto-Tuning is enabled for channel assignment, the radio selects another channel and performs the initial channel availability check on the new channel, during which time the flag changes back to Radar Scan.

Note: Radar Scan and Radar Detected apply only to 802.11a radios, for country codes that use DFS.

• The following information appears for external antennas:

• External antenna detected, configured as

antenna-model—Indicates that an external antenna has been detected, and lists the antenna model configured on the radio. (WSS Software does not detect the specific model.)

• External antenna detected, not configured—

	Indicates that an external antenna was detected
	but no external antenna is configured on the
	radio.
	• External antenna not detected, configured as
	antenna-model—Indicates that an external
	antenna is configured on the radio but no
	external antenna was detected.
operational channel	The channel on which the radio is currently operating.
	Note: If the channel number is followed by (Auto), the value was
	set by RF Auto-Tuning.
operational power	The power level at which the radio is currently operating.
	Note: If the power setting is followed by (Auto), the value was
	set by RF Auto-Tuning.
base mac	Base MAC address of the radio.

NN47250-100 (Version 02.51)