Nortel Networks 2300 Series manual Set radius proxy client, Set radius proxy port

RADIUS and Server Groups Commands 499

set radius proxy client

Adds a RADIUS proxy entry for a third-party AP. The proxy entry specifies the IP address of the AP and the UDP ports on which the WSS listens for RADIUS traffic from the AP.

Syntax set radius proxy client address ip-address

[acct-portacct-udp-port-number] [port udp-port-number]key string

address ip-address	IP address of the third-party AP. Enter the address in dotted
	decimal notation.
port udp-port-number	UDP port on which the WSS listens for RADIUS access-
	requests from the AP.
acct-port acct-udp-	UDP port on which the WSS listens for RADIUS stop-
port-number	accounting records from the AP.
key string	Password (shared secret key) the WSS uses to authenticate and
	encrypt RADIUS communication.

Defaults The default UDP port number for access-requests is 1812. The default UDP port number for stop- accounting records is 1813.

Access Enabled.

History Introduced in WSS Software 4.0.

Usage AAA for third-party AP users has additional configuration requirements. See the “Configuring AAA for Users of Third-Party APs” section in the “Configuring AAA for Network Users” chapter of the Nortel WLAN 2300 System Software Configuration Guide.

Examples The following command configures a RADIUS proxy entry for a third-party AP RADIUS client at 10.20.20.9, sending RADIUS traffic to the default UDP ports 1812 and 1813 on the WSS:

WSS# set radius proxy client address 10.20.20.9 key radkey1

success: change accepted.

See Also

•clear radius proxy client on page 485

•set authentication proxy on page 190

•set radius proxy port on page 489

set radius proxy port

Configures the WSS port connected to a third-party AP as a RADIUS proxy for the SSID supported by the AP.

Syntax set radius proxy port port-list[tag tag-value]

ssid ssid-name

port port-list WSS port(s) connected to the third-party AP.

Nortel WLAN—Security Switch 2300 Series Command Line Reference