Nortel Networks 2300 Series manual Set ap auto radiotype, 11a-802.11a

258AP Commands

Syntax set ap auto persistent [ap-numall]

ap-num	Converts the configuration of the AP that has the specified connection
	number into a permanent configuration.
all	Converts the configurations of all Auto-APs being managed by the switch
	into permanent configurations.
Defaults	None.
Access	Enabled.

History Introduced in WSS Software 4.0. Option dap removed in 6.0.

Usage To display the AP numbers assigned to Auto-APs, use the show ap status auto command.

Examples The following command converts the configuration of Auto-AP 10 into a permanent configuration:

WSS# set ap auto persistent 10 success: change accepted.

See Also

•set ap auto on page 245

•set ap auto mode on page 247

•set ap auto radiotype on page 248

set ap auto radiotype

Sets the radio type for single-AP radios that use the AP configuration profile.

Syntax set ap auto [radiotype {11a 11b11g}]

radiotype 11a 11b 11g	Radio type:
	•	11a—802.11a
	•	11b—802.11b
	•	11g—802.11g

Note:

Defaults The default radio type for models 2330, 2330A, 2330B, and 2332 and for the 802.11b/g radios in other models is 802.11g in regulatory domains that support 802.11g, or 802.11b in regulatory domains that do not support 802.11g.

Access Enabled.

NN47250-100 (Version 02.51)