Nortel Networks 2300 Series Show ap fdb, Output for show ap fdb, Syntax show ap fdb ap-number

AP Commands 363

show ap fdb

Displays the entries in a specified AP’s forwarding database.

Syntax show ap fdb ap-number

ap-numberIndex value that identifies the AP on the WSS switch.

Defaults None.

Access All.

History Introduced in WSS Version 6.0.

Examples The following command displays FDB entries for AP 7:

WSS# show ap fdb 7

AP 7:

# = System Entry. $ = Authenticate Entry

VLAN TAG Dest MAC/Route Des [CoS] Destination Ports

----	----	----------------- -----		-----------------
4095 4095		00:0b:0e:00:ca:c1	#	CPU
4095	0	00:0b:0e:00:04:0c		eth0

Table 42 describes the fields in the show ap fdb output.

	Table 9: Output for show ap fdb
Field		Description
VLAN		VLAN number.
TAG		VLAN tag value. If the interface is untagged, the TAG field is
		blank.
Dest MAC/Route Des		MAC address of this forwarding entry’s destination.
CoS		Type of entry. The entry types are explained in the first row of the
		command output.
		Note. This Class of Service (CoS) value is not
		associated with WSS quality of service (QoS) features.
Destination Ports	WSS switch port associated with the entry. A switch sends traffic
		to the destination MAC address through this port.

See Also

•set ap local-switching mode on page 260

•set vlan-profile

Nortel WLAN—Security Switch 2300 Series Command Line Reference