Nortel Networks 2300 Series manual Clear ip telnet, Clear ntp server, Syntax clear ip telnet

112IP Services Commands

See Also

•set ip route on page 116

•show ip route on page 153

clear ip telnet

Resets the Telnet server’s TCP port number to its default value. A WSS listens for Telnet management traffic on the Telnet server port.

Syntax clear ip telnet

Defaults The default Telnet port number is 23. Access Enabled.

Examples The following command resets the TCP port number for Telnet management traffic to its default:

WSS# clear ip telnet success: change accepted.

See Also

• set ip https server on page 116

• set ip telnet on page 120

• set ip telnet server on page 120

• show ip https on page 152

• show ip telnet on page 155

clear ntp server

Removes an NTP server from a WSS configuration.

Syntax clear ntp server {ip-addrall}

ip-addr	IP address of the server to remove, in dotted decimal notation.
all	Removes all NTP servers from the configuration.
Defaults	None.
Access	Enabled.

Examples The following command removes NTP server 192.168.40.240 from a WSS configuration:

WSS# clear ntp server 192.168.40.240 success: change accepted.

See Also

•clear ntp update-interval on page 103

NN47250-100 (Version 02.51)