Nortel Networks 2300 Series manual Set system name, Syntax set system name string

76System Services Commands

See Also

•clear system on page 55

•set system contact on page 62

•set system name on page 66

•show system on page 68

set system name

Changes the name of the WSS from the default system name and also provides content for the CLI prompt, if you do not specify a prompt.

Syntax set system name string

string	Alphanumeric string up to 256 characters long, with no blank spaces. WLAN
	Management Software requires unique WSS names.

Defaults By default, the system name and command prompt have the same value. The factory default for both is WSS-mmmm-nnnnnn, where mm is the model number and nnnnnn is the last 6 digits of the 12-digit system MAC address.

Access Enabled.

Usage Entering set system name with no string resets the system name to the factory default.

To view the system name string, type the show system command.

Examples The following example sets the system name to a name that identifies the WSS:

WSS# set system name WSS-bldg3 success: change accepted. WSS-bldg3#

See Also

•clear system on page 55

•set prompt on page 62

•set system contact on page 62

•set system location on page 65

•show system on page 68

NN47250-100 (Version 02.51)