CHART SPEED
The rate echoes scroll across the screen is called the chart speed. It’s adjustable by pressing a menu key until the chart speed menu appears. Chart speed is set to maxi- mum when the unit is first turned on. To decrease it, press the down arrow key. Press the up arrow key to increase the speed again. The percentage of chart speed also shows on this menu. Echoes scrolling onto the screen will also show the effects of the change. If you reach the maximum or minimum level, an warning tone sounds.
CHART STOP
To stop the chart, first clear any menu from the screen by pressing the PWR/CLEAR key. You can’t stop the chart while a menu is displayed. Now press the up arrow key. The chart will freeze and the word “STOP” appears at the top right portion of the screen. To start the chart, press the up arrow key again or the PWR/CLEAR key.
DISPLAY MODE
This sonar has two different screen modes - Chart 1, (shown at right) which is the normal mode and Chart 2 which is the FasTrak mode. To change modes, press the MENU key until the “DISP MODE” (Display Mode) menu appears. Then press the up or down arrow keys to change it.
CHT 2 (Chart #2)
This is the FasTrak mode. It has the following features:
1.Automatic Off
2.Fish ID Feature Off
3.Digital Depth Display Off
19
