Sennheiser ADN instruction manual Using the log and diagnosis function Event Log, Made see

Using the “Conference Manager” software

Changing the conference mode

Changing the maximum number of speakers who can take the floor simultaneously

Changing the maximum number of requests to speak

Changing the behavior of the signal light ring when a request to speak is made

To change the speaking time limit:

￿In the “Talk Time” box, enter the desired speaking time limit into the drop- down list field (see also page 91).

￿From the “Mode” drop-down list in the “Conference” box, select the desired conference mode (see page 90).

￿From the “Open” drop-down list in the “Conference” box, select the maximum number of speakers who can take the floor simultaneously (see also page 91).

￿Change the maximum number of requests to speak (see page 91).

￿ Change the behavior of the signal light ring	when a request to speak is
made (see page 91).

Exiting the “Live” operating mode

You can exit the “Live” operating mode by calling up the “Setup” operating mode:

￿Click the “Setup” button.

The “Stop” warning message appears.

￿Click “OK”.

The software switches to “Setup” operating mode and the View windows change their appearance accordingly. A running conference is not interrupted.

Using the log and diagnosis function – “Event Log“

The log and diagnosis function allows you to log all changes to the conference system. As soon as a change to the system or an error is detected, the button on the toolbar changes to .

To start the “Event Log” function:

￿Click the button on the toolbar.

Or, if the “Processing” window is displayed:

102