Sennheiser Overview of the ADN CU1 display panel, Text/icon, Possible display/function

Overview of the components

Overview of the ADN CU1 display panel

After switch-on, the central unit’s display shows a progress bar for approx.

30 seconds and then the standard display:

G H I

Direct Access 30 Units

22

O N M L K J

Text/icon

GConference mode

Possible display/function

Current conference mode:

“Direct Access”, “Override”, “Request”

H Floor channel volume	Current volume setting for the conference units’
	built-in loudspeakers
I Number of	Number of connected conference units
conference units
J Connection status		: “Conference Manager” software is not
	connected to the central unit
		: “Conference Manager” software is
	connected to the central unit
K Structural change icon	Icon appears if, since the last initialization, a
	malfunction/change has occurred in the wiring
	of the conference units (see page 34)
L Cable fault icon	Icon appears if conference units are not correctly
	connected (see page 34)
M Short-circuit icon	Icon appears if there is a short circuit in the
	wiring of the conference units (see page 34).
	The display panel lights up red.
N Warning triangle	Icon appears if there is a malfunction/change
	(see page 34). The display panel lights up red.
O Lock mode icon	Lock mode of the central unit:
(see page 21)		: Lock mode is deactivated
		: Lock mode is activated

11