
Configuring the conference system via the central unit
Press the jog dial.
Your setting is stored. You are back to the operating menu.
By briefly turning the jog dial to the left or right, the next or the previous menu item or setting is displayed.
If you turn the jog dial to the left or right and hold it in this position, the menu items or settings change in quick succession (“fast search” function).
Canceling an entry
Press the ESC key.
The operating menu or the next higher menu level appears.
Or:
Press the standard display key. The standard display appears.
To subsequently directly return to the last edited menu item:
Press the jog dial repeatedly until the last edited menu item appears.
Exiting the operating menu
Press the standard display key. The standard display appears.
Or:
Press the ESC key repeatedly until the standard display appears.
Adjusting the conference settings – “Conference”
The settings available in the “Conference” menu item affect the behavior of the entire conference system during a conference.
CAUTION Interruption of a running conference
If you adjust settings in the “Conference” menu item during a running conference, the conference will be interrupted.
Inform the participants that the conference settings are being changed and that they might have to make a new request to speak.
Adjusting the conference mode – “Conference Mode”
Main Menu
Conference
Audio
System
Select and call up the “Conference” submenu
Conference
Conference Mode
Microphone Limit
Request Limit
Direct Access
Select and call up the “Conference Mode” menu item
Conference Mode
Direct Access
Override
Request
Direct Access
Select the desired setting; store the setting
Possible settings: “Direct Access”, “Override” and “Request”.
•“Direct Access” mode and “Override” mode:
These two conference modes do not require the use of a chairman unit.
26