Configuring the conference system via the central unit

The following tables show possible error indications and steps for error elimination.

Display

 

Direct Access

 

30 Units

 

 

 

 

 

 

 

 

 

 

20

Only the warning triangle N is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

displayed.

 

 

 

 

 

 

 

 

 

 

N

 

 

 

 

 

 

 

 

 

Error and Several errors may have occured.

remedy

￿ Check the

following menu items one after the other (see

 

 

 

page 38):

 

 

 

 

System Load

Temperature

Bus Statistics

If the menu items display errors, follow the options and/or steps for error elimination mentioned there.

Display

 

Direct Access

 

 

 

 

30 Units

 

 

 

 

 

 

 

 

 

20

Only the structural change

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

icon K is displayed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

K

Error

Change in the number of conference units due to:

 

• manual adding or removal of one or several conference units

 

• automatic resetting of one or several conference units (the

 

 

conference units restart)

 

switch-off of one or several conference units due to under-

 

 

voltage

 

 

 

 

 

 

 

• disconnection of one or several conference units e.g. caused by

 

 

– faulty plug connections

 

 

– wire or cable faults

 

 

 

 

 

 

 

 

 

 

 

35

Page 36
Image 36
Sennheiser ADN instruction manual Display, Remedy, System Load Temperature Bus Statistics, Error