Saving a configuration

Activating/deactivating automatic loading of a configuration

To automatically load a saved configuration at startup of the conference system:

In the menu bar, click “Global Menu” > “Autoload”. The “Autoload Properties” window appears.

Establish a connection to the central unit (see page 66).

Select the “Enable Autoload” option button.

Select the desired configuration from the drop-down list.

Click “OK”.

At the next startup of the conference system, the selected configuration is automatically loaded in “Live” operating mode.

To deactivate automatic loading of a configuration:

Select the “Disable Autoload” option button.

Click “OK”.

You can save any number of configurations on either the central unit or locally on the connected Windows PC.

To save a newly created configuration on the central unit:

In the menu bar, click “Global Menu” > “Save”. The “Save Conference” window appears.

If necessary, establish a connection to the central unit (see page 66).

Enter a file name into the drop-down list box.

Click “OK”.

The file is saved on the central unit.

You can click “Global Menu“ > “Save” to save a configuration that already has a file name; there is no further query.

Settings made in “Live” operating mode or via the central unit’s oper- ating menu are immediately saved to the current configuration.

To protect your configuration, we recommend that you save it under a different file name before changing to “Live” operating mode:

Make sure that the software is connected to the central unit (see page 66).

Load the active configuration in “Setup” operating mode (marked with an asterisk “*”, see page 68).

This configuration contains the last settings used.

Save the configuration under a different file name (see above).